# ETH Staking Yield vs T-Bills

> Liquid-staked ETH earned 2.64% over 30 days across 16.75M ETH, against a 4.25% T-bill; stETH paid the most, 2.77%. Read onchain, updated 18 November 2026.

- Source: https://castlelabs.io/research/eth-staking-yield
- Type: Live data page, refreshed daily
- Data as of: 18 November 2026, 19:21 UTC
- Raw data (JSON, refreshed daily): https://castlelabs.io/data/eth-staking-yield.json
- Publisher: Castle Labs (https://castlelabs.io)

---

Live data · updated daily

What six major liquid staking tokens on Ethereum earned over the last 7 and 30 days, measured the same way for each from its own contract, set against the Treasury bill, and how long Ethereum's validator queues are. Refreshed every day by Castle Labs. Rates, not advice.

## Short answer

Over the 30 days to 18 November 2026, liquid-staked ETH earned 2.64% a year, weighted by the 16.75M ETH held in the six major liquid staking tokens Castle reads. That is 1.61 percentage points below the 13-week Treasury bill's 4.25%, though staking pays in ETH and the bill in dollars.

stETH (Lido) earned the most, 2.77%, and rETH (Rocket Pool) the least, 1.96%. Lido's stETH holds 58% of the ETH in these tokens.

Ethereum's validator entry queue holds 880.7K ETH, about 15 days, 7 hours before new stake starts earning; 196.4K ETH is queued to leave, about 4 days, 4 hours before it can be withdrawn.

- 30-day yield: 2.64%, weighted across 16.75M ETH
- 7-day yield: 2.33%, same tokens, last 7 days
- Highest, 30 days: 2.77%, stETH, Lido
- 13-week T-bill: 4.25%, US Treasury, 17 November 2026

Contract reads on Ethereum, 18 November 2026

## ETH staking yield by token

Ethereum · 18 November 2026

| # | Token | Issuer | 30-day yield | 7-day yield | vs T-bill | Staked ETH | Share | ETH per token |
| --- | --- | --- | --- | --- | --- | --- | --- | --- |
| 1 | stETHrate read from wstETH | Lido | 2.77% | 2.31% | -1.48 pp | 9.76M ETH | 58.2% | 1.2495 |
| 2 | wBETH | Binance (exchange) | 2.44% | 2.37% | -1.81 pp | 3.67M ETH | 21.9% | 1.1110 |
| 3 | eETHrate read from weETH | ether.fi | 2.58% | 2.41% | -1.67 pp | 2.28M ETH | 13.6% | 1.1084 |
| 4 | cbETH | Coinbase (exchange) | 2.61% | 2.55% | -1.64 pp | 450.6K ETH | 2.7% | 1.1444 |
| 5 | rETH | Rocket Pool | 1.96% | 1.85% | -2.29 pp | 356.6K ETH | 2.1% | 1.1760 |
| 6 | mETH | Mantle | 2.28% | 1.93% | -1.97 pp | 236.2K ETH | 1.4% | 1.1031 |

Exchange rates and balances read from each token's contract on Ethereum through [PublicNode](https://www.publicnode.com/); addresses from [Lido's](https://docs.lido.fi/deployed-contracts/) and [ether.fi's](https://etherfi.gitbook.io/etherfi/contracts-and-integrations/deployed-contracts) docs. Yield is the change in the exchange rate, annualised, after each issuer's fee. vs T-bill uses the 30-day yield against the [13-week T-bill](https://home.treasury.gov/resource-center/data-chart-center/interest-rates/TextView?type=daily_treasury_bill_rates); ETH yield and dollar yield are not the same return.

## Ethereum validator queue: how long to stake or unstake

Beacon Chain · 18 November 2026

| # | Queue | ETH waiting | Wait | Limit |
| --- | --- | --- | --- | --- |
| 1 | Entrynew stake and top-ups | 880.7K ETH | 15 days, 7 hours | 256 ETH per epoch |
| 2 | Exitexits and partial withdrawals | 196.4K ETH | 4 days, 4 hours | 256 ETH per epoch |

Read from Ethereum's Beacon Chain through [PublicNode](https://www.publicnode.com/). Limits and waits follow [Ethereum's protocol rules](https://github.com/ethereum/consensus-specs/blob/master/specs/electra/beacon-chain.md). The exit wait runs to when the ETH can be withdrawn.

Ethereum lets at most 256 ETH join the validator set each epoch of 6.4 minutes, about 57,600 ETH a day, and the same amount leave. ETH deposited on 18 November 2026 waits about 15 days, 7 hours before it starts earning. A validator that asks to exit can withdraw in about 4 days, 4 hours, including a fixed wait of about 27 hours; the withdrawal sweep then pays it out.

For the tokens above, new ETH sent to an issuer earns nothing until its validators clear the entry queue, and redemptions an issuer cannot fill from ETH it already holds wait for the exit queue.

## What the numbers say

The two tokens issued by exchanges, Binance's wBETH and Coinbase's cbETH, earned 2.46% over 30 days across 4.12M ETH, 0.25 percentage points less than the four protocol tokens (2.70% across 12.63M ETH). Each issuer takes its fee out of the rewards before they reach the rate.

The ETH held in these six tokens went from 16.52M ETH on 19 October 2026 to 16.75M ETH on 18 November 2026, up 1.4%.

The 7-day figure moves more than the 30-day one. Each token updates its rate about once a day, at its own time, so a 7-day window can hold six to eight updates. Read the 30-day yield as the headline.

## Method and gaps

-   Staked ETH counts tokens on Ethereum only. Copies bridged to L2s are locked on Ethereum, so adding them would count the same ETH twice. wBETH is also issued on BNB Chain, which is not counted.
-   stETH's ETH is Lido's total pooled ether, read from the stETH contract; eETH is counted at one ETH per token, as ether.fi issues it. The others are supply times exchange rate.
-   weETH's rate leaves out points and rewards paid outside the token.
-   Days before 18 November 2026 were read once, at 18:00 UTC each day, from dRPC's public node; since then, one read a day through PublicNode.
-   The entry queue counts every pending deposit, top-ups to existing validators included, and its wait divides that ETH by the per-epoch limit. The exit queue counts validators leaving plus partial withdrawals, which share one limit; validators being merged into others have a separate limit and are left out. The entry wait leaves out about an hour of finality and activation steps, and the exit wait leaves out the withdrawal sweep.

## Related on Castle

-   [What is a liquid staking token?](https://castlelabs.io/research/glossary#liquid-staking) in the glossary.
-   [Stablecoin yields against the T-bill](https://castlelabs.io/research/stablecoin-yields) and the [largest tokenized Treasury funds](https://castlelabs.io/research/tokenized-treasuries).

## Questions and Method

### What is the ETH staking yield today?

Across the six major liquid staking tokens Castle reads, staked ETH earned 2.64% a year over the 30 days to 18 November 2026 and 2.33% over the last 7 days, weighted by the ETH each token holds. That is what holders received after each issuer's fee, measured from the tokens' exchange rates.

### Which liquid staking token pays the most?

Over the last 30 days stETH from Lido earned the most, 2.77%, and rETH from Rocket Pool the least, 1.96%. The gap comes from each issuer's fee, how much of its ETH is waiting to be staked or withdrawn, and the validators it runs. The ranking changes from month to month.

### Does ETH staking pay more than Treasury bills?

Not at the moment. On 17 November 2026 the 13-week T-bill yielded 4.25%, against 2.64% for liquid-staked ETH over 30 days. The two are paid in different currencies: staking pays in ETH, so a holder's return in dollars also moves with the ETH price, while the bill pays in dollars.

### How long is the ETH staking queue right now?

On 18 November 2026, 880.7K ETH was waiting to join Ethereum's validator set, about 15 days, 7 hours at the current limit of 256 ETH per epoch (57,600 ETH a day). 196.4K ETH was waiting to leave, about 4 days, 4 hours until it can be withdrawn. Castle reads both queues from Ethereum's Beacon Chain once a day.

### How long does it take to unstake ETH?

For a validator that asks to exit today, about 4 days, 4 hours until its ETH can be withdrawn: the exit queue, 196.4K ETH ahead of it, plus a fixed wait of about 27 hours. Ethereum's withdrawal sweep then pays the ETH out automatically, at up to 16 withdrawals a block, which can add several days. A liquid staking token can be sold on the market at once, at the market price, or redeemed with its issuer, which takes as long as the issuer needs to find the ETH: from ETH it already holds, or by exiting validators through the same queue.

### How does Castle calculate the staking yield?

Each token's value in ETH rises as staking rewards arrive. Castle reads that exchange rate from each token's contract once a day and annualises the change over the exact time between two reads, as a simple rate: the method Lido uses for its own stETH figure. stETH and eETH change their balances instead of their price, so their rate is read from the wrapped versions, wstETH and weETH. Every token is measured the same way, so the figures can be compared directly.

### Does the weETH yield include restaking rewards?

Only what reaches weETH's exchange rate. ether.fi points, EigenLayer points and rewards paid out separately as other tokens are not in the rate, so they are not in this figure.

### Where does this data come from?

Every exchange rate and ETH balance is read from the token contracts on Ethereum through PublicNode's public nodes, and the validator queues from Ethereum's Beacon Chain through PublicNode's Beacon API. Days before 18 November 2026 were read once from dRPC's public node. The T-bill rate comes from the US Treasury.

Raw data, refreshed daily: [eth-staking-yield.json](https://castlelabs.io/data/eth-staking-yield.json). Free to cite with a link to this page.

More live data

-   [Crypto Token Buybacks Every protocol that buys back its own token, ranked by 30-day buybacks, with the yearly pace, buyback yield against market cap and what happens to the tokens](https://castlelabs.io/research/token-buybacks)
-   [Institutional Vaults and Curators DeFi risk curators by assets managed, how much of each large Morpho vault is withdrawable now, redemption rules and custody routes](https://castlelabs.io/research/institutional-vaults)
-   [Morpho Stats Morpho's deposits, loans, interest paid and chains, its largest vault curators, and Castle's research on it](https://castlelabs.io/research/morpho)

[See all 19 live data pages](https://castlelabs.io/research#live-data)

## Data sources

- [PublicNode RPC](https://www.publicnode.com/)
- [dRPC (one-off history read)](https://drpc.org/)
- [US Treasury](https://home.treasury.gov)
